News

A Major food company controls the drying atmosphere of one of its dried fruit roasting kilns thanks to an OPTIMA® System   

2022/01/26

A leading food and beverage company with a history of more than 80 years, decides to install one of our OPTIMA ® Systems to control the humidity levels in one of its nut roasting furnaces.

Thanks to this installation, the customer will be able to know at all times the % of humidity present inside the kiln, which will facilitate better control of product quality and guarantee better repeatability. In addition, they will obtain considerable ...

OXYCOMB Sistemas and SITI & BT.   

2022/01/17

ESTUDIO CERÁMICO once again relies on OXYCOMB Sistemas to control the combustion atmosphere of another of its SITI ceramic kilns (2nd installation). In addition to the installation of the OPTIMA ® System, it has also chosen to install the new high-efficiency Vulcan burners from Ancora (SITI B&T) in a joint operation with OXYCOMB Systems that will guarantee gas savings of up to 2 digits.

With this project, the client will not only save on electricity ...

Important ceramic frits company installs a new Bluesky® System in another of its ceramic frit kilns   

2021/12/21

One of the most important companies in the ceramic frit sector has decided to once again rely on OXYCOMB Sistemas technology by installing another Bluesky ® System to control the combustion of the atmosphere in another of its frit furnaces.

This installation represents the 4th collaboration between companies in which the client will be able to be more efficient in energy terms as well as being able to guarantee a better quality of its products ...

Eiffage is committed to energy efficiency by installing a BLUESKY® System in one of its asphalt plants   

2021/11/30

The french multinational EIFFAGE, which has more than 15 plants in Spain, is launching a project to control atmospheric emissions and improve energy efficiency with the installation of a BLUESKY ® System at its plant in Seville.

Thanks to the installation of this system, the client will be able to control the levels of O 2 % and CO (mg / m3) of the hot gases, as well as the level of volatile particles before ...

IBERO will control the atmosphere of one of its kilns thanks to the Installation of an OPTIMA® System   

2021/11/22

KERABEN Group relies, once again, on OXYCOMB Sistemas for the atmosphere control in its ceramic kilns and installs a new OPTIMA ® System in its IBERO (Alcora) plant.

Thanks to this new installation, IBERO will be able to regulate its furnace more efficiently, obtaining good gas savings (payback in less than a year), controlling the quality of its products and, furthermore, reducing its atmospheric emissions.

With this installation, there are now 7 of the Group's ...

KALFRISA will control the atmosphere of one of its regenerative Thermal Oxidation chambers by installing a new OPTIMA® System   

2021/11/11

KALFRISA, a company with more than 50 years of experience in the supply of equipment, plants and technologies for heat recovery, heating of air or gases, incineration, reduction of volatile organic compounds (VOCs) and industrial heating, installs a new Optima ® System in one of its regenerative thermal oxidation chambers.

From the implementation of this System, KALFRISA will check in real time the existing O 2 % and CO levels, controlling in a more accurate ...

CERMER puts itself in the hands of OXYCOMB Sistemas to optimize its production process   

2021/11/04

Cerámicas Meridiano (CERMER), once again relies on OXYCOMB Sistemas to reduce the energy consumption of its production plant, this time by installing new inverters in its ceramic roller kiln which will reduce electrical production costs. In addition, this will facilitate the regulation of the furnace to improve combustion and thus also reduce costs in natural gas.

In the current market where energy prices have skyrocketed, reducing energy consumption is even more important and that is ...

PRODUCTOS TUBULARES works with OXYCOMB Sistemas.   

2021/10/25

The SALEM furnace for reheating PRODUCTS TUBULARES (Trápaga, Vizcaya), already controls oxygen and pressure in its combustion chamber thanks to the OPTIMA ® probes installed by OXYCOMB Sistemas.

The control of these two measures in all its zones will allow PRODUCTOS TUBULARES to find the most appropriate setpoints for each product by carrying out the pertinent actions in the furnace in order to optimize combustion both from the point of view of increasing energy efficiency ...

PLANOMYR is committed to energy efficiency with SITI-B&T and OXYCOMB Sistemas   

2021/10/07

The ceramic tile company from Alcora PLANOMYR S.L. installs an OPTIMA ® System to control the combustion atmosphere in one of its wall tile ceramic kilns. In addition to this installation, PLANOMYR also opted to assemble the new Vulcan burners from Ancora (SITI B&T) in a joint operation with OXYCOMB Sistemas that will guarantee gas savings of up to 2 digits.

Nowadays, more and more companies choose to reduce the consumption of natural resources without ...

AGC installs an OPTMA® System in one of its glass furnaces at the Bor plant (Russia)   

2021/09/29

OXYCOMB Sistemas crosses new frontiers to land in Bor (Russia) thanks to the trust placed in our equipment and services by the prestigious manufacturer AGC, a world leader in the manufacture of flat glass.

The new OPTIMA ® System installed in the transverse flame regenerative furnace will measure oxygen and temperature in the regenerative chambers where the measurement is essential to optimize the overall performance of the fusion process, in addition to guaranteeing a defined ...

ACEROS INOXIDABLES OLARRA trusts OXYCOMB Sistemas.   

2021/09/24

The Olarra Stainless Steel hot rolling furnace (Loiu, Vizcaya) will be able to control the oxygen of the combustion thanks to the OPTIMA ® probes installed by OXYCOMB Sistemas. The control of the O 2 % and the pressure in the preheating, heating and equalization areas, will allow Olarra to find the most appropriate setpoints for each product, taking the pertinent actions in the furnace in order to optimize combustion, increase in energy efficiency as ...

OXYCOMB installs 3 new Optima® Systems in Portugal thanks to RECAMBICER   

2021/07/08

As part of its international export and expansion program, OXYCOMB Sistemas makes a strong landing in our neighboring country Portugal with 3 new installations in 3 ceramic kiln plants through its partner RECAMBICER.

The objective of these new installations is to improve the quality of the product, as well as to achieve significant productive savings in energy matters.

OXYCOMB, as an exporter of technology and energy advice / consultancy, continues with its firm commitment to ...

GHI Smart furnaces and OXYCOMB Sistemas together in another new project   

2021/06/16

GHI Smart Furnaces once again relies on OXYCOMB Sistemas for the measurement and control of atmospheres for an important and historic treatmentist in the Basque Country, ESTAMCAL.

ESTAMCAL (SATUERCA), will have an OPTIMA ® System in its continuous line discharge furnace through which will be able to control the atmosphere in its heat treatment of Steel process. This way, they will guarantee the quality of their products in addition to controlling the flow of the ...

ANIVI (IQUE) controls the atmosphere of its furnace thanks to OXYCOMB Sistemas.   

2021/05/04

ANIVI, an important engineering company from the Basque Country, has just started up an OPTIMA ® oxygen control system for the Malpica Silicates plant (IQUE) in Zamudio, Bizkaia.This way, their melting furnace will control the excess of oxygen measured at the flue / chimney outlet in accordance with regulatory requirements.

With this installation, there are already 2 collaborations between ANIVI and OXYCOMB Sistemas, beginning to consolidate the good relationship between both companies and showing that ...

OXYCOMB Sistemas present in the prestigious magazine Técnica Cerámica   

2021/04/21

In its latest issue, 469, the magazine specialized in materials, equipment and manufacturing techniques for the ceramic sector, Técnica Cerámica, reported on a news item referring to the recent installation carried out by OXYCOMB Sistemas in one of the plants of RAK Ceramics in the United Arab Emirates.

In the following link you can read the full review in both Spanish and English. https://www.publica.es/digital/tc-469.htm

ADITEK installs an OPTIMA® XT probe in your heat treatment furnace.   

2021/03/11

ADITEK, a company specializing in surface, stabilized, normalized heat treatments ... will control the atmosphere of its quenching and tempering furnace for finished parts thanks to the installation of one of our OPTIMA ® XT probes.

With this new installation, OXYCOMB Sistemas establishes itself as a leader in the supply of probes for the measurement of carbon potential in the area of the Basque Country. Our client portfolio in the sector is increasing and it ...

External energy consulting service (SCE)   

2021/03/03

At Oxycomb Sistemas, in addition to the sale, installation and maintenance of our equipments, we also offer an energy consulting service to support our clients with the aim of optimizing the combustion process and consolidating the savings obtained.

There are 3 types: basic, intermediate and complete depending on the periodicity. It includes:

• Periodic monthly/ biweekly / weekly visits for the analysis and interpretation of the data provided by the OPTIMA ® System. (Oxidation and ...

RAK Ceramics installs its first Optima® System in one of its kilns thanks to SITI B&T   

2021/02/26

Rak Ceramics, one of the largest ceramic producing companies in the world, decides to install an Optima ® System in one of its ceramic tile kilns thanks to our partner Barbieri SITI B&T.

The excellent results obtained in recent years with the installation of our combustion control systems in many companies in the tile sector worldwide generated great interest from this tile company, located in the United Arab Emirates, which was consummated at the end ...

OPTIMA® System integration signals for the regulation and automation of a ceramic dryer.   

2021/02/18

Last year 2020, OXYCOMB Systems installed in an important ceramic tile company from Almeria several temperature and humidity measurement systems for the regulation of its ceramic dryers.

In order to further improve the process, OXYCOMB takes a step forward by automating it and thus reducing, even more so, electricity and thermal consumption (above 20%). In addition to energy savings, an improvement in product quality has been achieved by reducing condensation in the drying process.

With ...

Torrecid once again relies on Oxycomb Sistemas for combustion control in another of its ceramic frit kilns.   

2021/01/27

Torrecid, an important company in the ceramic frit sector, once again reaches an agreement with Oxycomb Sistemas for the installation of another Optima ® System.

With this new equipment, they will be 3 the ones already acquired by said company which will contribute with its installation an improvement in energy efficiency and quality control for the production of its frits.

With this new project, Torrecid demonstrates the trust placed in Oxycomb, further strengthening its business ...

UNDEFASA consolidates gas savings thanks to the OPTIMA® System   

2020/10/02

The business relationship between UNDEFASA and OXYCOMB Sistemas dates back to the beginning of the previous decade when UNDEFASA installed an OPTIMA ® System for its SACMI kiln.

At the beginning of 2020, UNDEFASA decided to renew this system in order to improve, even more, the control of the atmosphere in its furnace while consolidating the savings already obtained previously.

Thus, after more than half a year of hard work and with the added difficulty ...

ANIVI ENGENIERIA COMMITS TO THE OPTIMA SYSTEM FOR OXYGEN CONTROL IN THE INCINERATION SECTOR.   

2020/08/13

ANIVI, one of the most important suppliers in the world of equipment and services to the mining and chemical industry, will install an OPTIMA ® system with which will control the O 2 % in the flue gas outlet of a coolant and shavings incineration plant, for a final client in Mexico.

OXYCOMB Sistemas continues to advance internationally in the field of incineration by leading companies in this sector such as ANIVI Ingeniería.

OPTIMA® XT: Oxygen and Carbon Potential probe   

2020/04/29

OXYCOMB Sistemas is a manufacturer of oxygen probes for the control of Carbon Potential in steel heat treatment furnaces. This allows us to supply the probes in very short terms and always at very competitive prices.

Our OPTIMA ® XT probes offer continuous, on-site measurement with high precision, reliability and durability. Our range of probes includes different lengths and models, depending on the type of application and all of them are supplied with their corresponding ...

Together we will overcome it   

2020/04/16

Unfortunately due to COVID 19, in recent times there has been a large increase in the use of funeral and cremation services. Now more than ever, from OXYCOMB Sistemas we want to continue contributing our grain of sand. It is time to work all together, bridge differences, do our best and continue to fulfill the commitment made all these years to achieve a better, cleaner and more sustainable world.

For all this, for this sector, ...

SOMOCER and OXYCOMB Sistemas strengthen their ties thanks to the collaboration of GRINS   

2020/04/08

SOMOCER, an important tile company from Tunisia, recently reached an agreement with OXYCOMB Sistemas through its partner GRINS for the installation of the OPTIMA ® System in another 3 of its kilns.

With this installation, SOMOCER has now 5 kilns with the OPTIMA ® System which, together with the installation of the highly efficient burners by the Italian firm ANCORA from SITI & BT Group, is achieving gas savings of over 14%.

In addition to ...

OPTIMA® RH, the new analyzer for humidity and temperature control   

2020/03/20

OXYCOMB Sistemas, in its quest to improve industrial processes both in energy saving measures and in quality control, launches the new OPTIMA ® RH for the control of relative humidity and temperature in industrial dryers.

With the OPTIMA ® RH, customers will be able to improve the drying of their products, obtaining stable humidity values and a high repeatability index.

This will guarantee that our clients maintain, and even improve, the quality of their products ...

NERVACERO (CELSA GROUP) relies on OXYCOMB to control the atmosphere of its rolling kiln.   

2020/03/03

Nervacero, leader in the Spanish market in corrugated round, has recently installed an OPTIMA ® system to control the atmosphere in its rolling kiln. Oxygen control in the combustion chamber has allowed NERVACERO to optimize its process to the maximum, reducing fossil energy consumption and increasing production.

NERVACERO advised by OXYCOMB Sistemas, has achieved the maximum support that EVE (Basque Energy Entity) grants for this type of facilities, a shared success between both companies.

Laminating ...

ISSA installs an OPTIMA System to control its heat treatment of steel process   

2020/02/24

Ibérca de Suspensiones S.L. (ISSA), a leading company in the manufacture of damping springs for the automobile sector, installs a complete oxygen control system for its galloping beams heating furnace.

Thanks to the installation of the Optima ® System, ISSA will be able to guarantee the quality of its products complying with the CQI-9 norm in addition to obtaining considerable energy savings.

In OXYCOMB Sistemas we are experts in the control of industrial combustion atmospheres ...

MULTICERAME installs another OPTIMA® System for the last of its kilns   

With this installation, the 5th in a row, MULTICERAME completes its global energy saving project in all of its furnaces. This time has been the turn of its special piece kiln with which, in addition to obtaining significant energy savings, it will be able to control the product quality, something fundamental for this type of product.

The agreement between MULTICERAME and OXYCOMB Sistemas was closed, once again, through our partner GRINS which gives us coverage ...

OXYCOMB Sistemas awaits you at its stand at the CEVISAMA 2020 fair   

2020/01/22

As announced a few months ago, OXYCOMB Sistemas will attend the next edition of the international ceramics fair CEVISAMA 2020 and will do so as an exhibitor whose stand will be located at N2 - PB3 - D9.

CEVISAMA celebrates its 38th edition from February 3 to 7 at Feria Valencia with more offer and new proposals. OXYCOMB Sistemas, will present its latest developments at this fair, such as the new OPTIMA ® RH humidity ...

OXYCOMB Sistemas wishes you a Merry Christmas and a happy new year   

2019/12/17

THE SIZE installs again an OPTIMA® System in another of its kilns   

2019/12/02

THE SIZE Surfaces, a company specialized in the production of large-format tables, relies again on OXYCOMB Systems for oxygen control in another of its kilns at the plant located in Almazora.

After the good results obtained with the first installation, THE SIZE has not hesitated to return to OXYCOMB Sistemas to control the atmosphere of a new kiln with which it hopes to strengthen the quality of its products while saving on the costs of ...

Important tile company from Almería installs the OPTIMA® System in several sections of its production process.   

2019/11/25

This multinational company from Almeria, a leader in the coating surface market, signs an important agreement with OXYCOMB Sistemas for the installation of an OPTIMA ® System in one of its kilns.

Thanks to the control of the atmosphere of its ceramic roller kiln, our client expects to be more energy efficient in addition to improving the quality of its products to strengthen, even more if possible, its leading position in the market.

From OXYCOMB ...

The MARAZZI Group installs a new OPTIMA® System for its plant in Ctra. Borriol   

2019/11/19

MARAZZI, the leading international company in the ceramic wall and floor tiles sector, is once again in the hands of OXYCOMB Sistemas to control the atmosphere of another of its kilns, this time for its plant located in Borriol.

With this installation, its 4th, MARAZZI intends to carry out an exhaustive control of the firing process with the aim of complying, even more if possible, with quality problems and improving energy efficiency.

With this new ...

HERLOGAS reaches an agreement with OXYCOMB Sistemas for the supply of oxygen probes   

2019/11/12

HERLOGAS, an important engineering company in Bilbao with more than 50 years of experience developing and innovating in gas combustion equipment, decides to go for the OPTIMA ® system for oxygen control in the atmospheres of its salt smelters.

The HERLOGAS system is specially designed to preheat the thermal storage salt tanks of a solar thermal power plant in a short time and with great temperature uniformity. With the OPTIMA ® system, they will be ...

OXYCOMB Sistemas,one more year, will present its novelties at CEVISAMA 2020   

2019/11/06

OXYCOMB Sistemas, together with its commercial team, will be present one more year at CEVISAMA, the International Exhibition of ceramics, brick, enamels, frits and machinery that will be held in Valencia from February 3 to 7 of next year 2020.

We will be pleased to receive you at our stand, located in N2 - PB3 - D9, with all our team to present all our new novelties like the new OPTIMA ® RH humidity sensor ...

TODAGRES decides to control the atmospheres of its atomizers.   

2019/10/22

TODAGRES, a specialized company and pioneer in the manufacture, distribution and sale of porcelain stoneware flooring, once again opts for the technology and advice of OXYCOMB Sistemas to carry out continuous oxygen and pressure control in its 2 atomizers

Undoubtedly, the excellent results obtained with the equipment previously installed in its 2 furnaces have not made TODAGRES doubt when it comes to relying on the technological and advisory solutions of OXYCOMB Sistemas.

The installation of ...

ADEX relies again on OXYCOMB Sistemas for oxygen control in its second kiln   

2019/10/07

ADEX Spain is one of the oldest factories in the tile industry (since 1897) whose philosophy is to offer design, style and quality from an artisanal factory with advanced technology. For this reason and thanks to the good results achieved with the installation of the OPTIMA ® System in its 1st furnace, ADEX S.L decides again to rely on the technology of OXYCOMB Sistemas in its search for energy savings and quality control of its ...

GRUPO RIZA lays on our OPTIMA® XTT System to control the atmosphere of its treatment furnaces.   

2019/10/04

Grupo Riza is an important group in the metallurgical sector of Euskadi with extensive experience in forging, heavy boilermaking and heat treatment.

At present, the importance of thermal and thermochemical treatments in the metallurgy sector as well as the demanded quality is increasing. Grupo Riza, in order to guarantee the best quality for its products, trusts in OXYCOMB Sistemas to control its heat treatment process and thereby be able to meet the demands of its ...

OXYCOMB Sistemas and NEOELECTRA sign an agreement for the delivery of a BLUESKY® system   

2019/09/25

The NEOELECTRA Group is a business group which manages assets of cogeneration, biomass and CO 2 recovered from food and offers a wide range of efficient energy solutions, industrial services and energy and gas.

By implementing the BLUESKY ® System for the continuous control of O 2 , CO 2 and CO (calculated) in the Biomass boiler’s chimney, NEOELECTRA will be able to achieve a global monitoring of combustion quality, helping to track the process ...

MFS SINTERING & OXYCOMB Sistemas reach an agreement for the installation of a BLUESKY® System in one of its sintering furnaces   

2019/09/09

MFS SINTERING, a company dedicated to the manufacture of sintered parts from metallic powder and different additives, has recently installed a BLUESKY ® System to control the atmosphere of one of its furnaces.

With our BLUESKY ® analyzers, MFS Sintering will be able to measure the atmosphere of its sintering furnace and, thanks to our software and through a monitoring screen, they will visualize in real time the influential variables in its process and thus ...

GHI Smart furnaces relies on OXYCOMB Systems for the control of atmospheres in one of their projects for an important heat treater of the Basque Country   

2019/06/30

GHI, one of the most important engineering companies in the metal heat treatment sector, relies on OXYCOMB Sistemas for the measurement and control of atmospheres in one of its furnaces for an important heat treater in the Basque Country, NIVAC.

NIVAC, which belongs to the IMESAZA group, will have an OPTIMA ® System in its furnace through which it will be able to control the carbon potential in its steel heat treatment process. Thanks to ...

Mim Tech Alfa will control its molding process at the hands of OXYCOMB Sistemas.   

2019/06/21

ININSER, Engineering of the Basque Country which gives service to the industry with extensive experience in thermodynamic installations, will install a BLUESKY ® System in one of ALFA Min Tech furnaces, an important manufacturer of parts in various sectors that are very demanding for customers such as Airbus.

The MIM technology (Metal Injection Molding) allows to obtain very complex parts in a wide range of metallic materials, with very narrow tolerances and a very high ...

OXYCOMB Sistemas establishes a new delegation in Bilbao for its northern clients.   

2019/02/11

OXYCOMB Sistemas, in its desire to strengthen its ties with its customers in the north of Spain as well as the search for new ones, decides to open a new delegation in the Basque Country, to to provide from there a better support and facilitate the deal with its customers of Euskadi, Navarra, Cantabria, etc.

The Northern delegation joins the two existing ones, Levante located in Castellón for its clients from the Eastern zone of ...

Archela Contrachapados decides to control the combustion of its biomass boiler.   

Archela, an important plywood production company, has decided to rely on OXYCOMB Sistemas to control and regulate the oxygen in its biomass boiler. Thanks to our OPTIMA ® System, Archela is obtaining an improvement in the combustion process of the interior of its boiler obtaining energy and economic savings as well as a decrease in atmospheric emissions which facilitate the company compliance with the law on environmental issues. The agreement with Archela is another example that ...

OXYCOMB Sistemas expands its links with the North African market   

2019/01/21

OXYCOMB Sistemas, within its export and international expansion program, disembarks with strength in Tunisia with the installation of a new OPTIMA ® System in a ceramic kiln of an important Tunisian company. After the installation of our OPTIMA ® System and subsequent monitoring, the OXYCOMB Sistemas team, thanks to its extensive experience in combustion control, has been able to achieve savings over the estimates, demonstrating the importance of controlling in continuous temperature, oxygen and pressure. Thanks to ...

MARAZZI-IBERIA strengthens its links with OXYCOMB Sistemas.   

2018/12/18

Marazzi Iberia, a Spanish subsidiary of the Italian group Marazzi, has just installed a new OPTIMA® System for another of its ceramic kilns in one of its plants located in Castellón. With this installation, and this one is the third, Marazzi consolidates its trust in OXYCOMB Sistemas and further strengthens the relationship between both parties and all it thanks to the good results obtained with its 2 previous installations of our OPTIMA® System for the control ...

OXYCOMB Sistemas awaits you at its stand at the Tecnargilla 2018 fair   

2018/09/18

As already announced a few months ago, OXYCOMB Sistemas will attend the Tecnargilla 2018 fair next week and will do so as an exhibitor whose stand will be located in the new Greentech pavilion (A3- Stand 191). <<<Tecnargilla Exhibition, international reference fair of machinery and supplies for the ceramic industry, will be held in the city of Rimini (Italy) from September 24 to 28 and will debut the new pavilion "GreenTech", an area specialized in environmental ...

OXYCOMB installs 3 new OPTIMA® Systems in Titanium Kilns by Barbieri & Tarozzi   

2018/08/09

Thanks to their close relationship, OXYCOMB Sistemas and SITI-BT Group closed an agreement last month for the installation of 3 new equipment for continuous control of O 2 % and pressure in their new Titanium kilns. Barbieri & Tarozzi will install our OPTIMA ® Systems in its new kilns for the Latin American, European and Asian markets and thereby demonstrate the importance of optimizing, regulating and exhaustively controlling the ceramic firing process.

MULTICERAME achieves great savings with the help of OXYCOMB Sistemas   

2018/08/02

MULTICERAME, a leading company specializing in the production and marketing of high-end ceramic tiles in our neighboring country of Morocco, has once again relied on OXYCOMB Sistemas for the fourth time in a row, to improve the quality of its products and achieve greater energy efficiency .

The agreement between MULTICERAME and OXYCOMB Sistemas was closed through our partner GRINS and thanks to the installation of an OPTIMA ® System in one its kilns, they ...

HERMANOS LLANSOLA trusts in OXYCOMB Sistemas again.   

2018/07/13

HERMANOS LLANSOLA, S.L., specializing in the manufacture of ceramic bisque and special pieces in red paste, white paste, stoneware and porcelain installs another OPTIMA ® System to control the oxygen and pressure in its second kiln.

Thanks to the good results obtained with the installation of the OPTIMA ® System in its first kiln, HERMANOS LLANSOLA once again relies on our equipment in its search for energy saving and quality control of its products as ...

EXAGRES searches for a more exhaustive in the quality control of its products and decides to install a second OPTIMA® System   

2018/07/05

EXAGRES S.A, company dedicated to the manufacture, design and commercialization of tiles and special pieces of extruded ceramics, has as main objective the customer satisfaction taking care of the fulfillment of its quality standards and for that it decides to trust again in our OPTIMA ® System.

After the good results harvested with the previous installation of the OPTIMA ® System in a first kiln, EXAGRES decides to return to the hands of OXYCOMB Sistemas ...

ADEX S.L. Relies on OXYCOMB Sistemas to control the atmosphere of one its kilns   

2018/06/27

ADEX S.L., one of the oldest factories in the ceramic industry and characterized by its artisanal design, style and quality ; has just installed OTPIMA SYSTEM ® for the continuous control of the oxygen and pressure in one of its kilns at its plant located in Paterna (Valencia). ADEX, which has a long ceramic tradition since 1897, joins the 4.0 industry and decides to rely on OXYCOMB Sistemas for the measurement and atmosphere control to improve ...

Oxycomb Sistemas present in the new pavilion 'GreenTech' that will debut Tecnargilla 2018   

2018/05/31

Tecnargilla 2018, international reference fair of machinery and supplies for the ceramic industry, will be held in the city of Rimini (Italy) from September 24 to 28 and will debut the new pavilion "GreenTech", an area specialized in environmental innovation, thus expanding its offer along with other existing areas: "Claytech", "Kromatech", "T-Finishing" and "T-White". "GreenTech" will be dedicated to all existing technologies and products capable of reducing consumption and emissions, as well as improving the performance ...

OXYCOMB SISTEMAS AND THE INDUSTRY 4.0   

2018/05/14

The concept of Industry 4.0 corresponds to a new methodology of organizing the means of production. The objective to be achieved is the implementation of a large number of "smart factories" capable of obtaining greater adaptability to the needs and production processes, as well as increasing the quantity and quality of production with a much lower cost, energy saving and being more energetically efficient. With this new concept, the control, analysis and the optimization of the ...

New OPTIMA® systems in three SACMI kilns of EQUIPE Cerámicas.   

2018/04/18

OXYCOMB Sistemas installed three new OPTIMA® Systems for continuous pressure control a few months ago. With this system there are already 5 kilns equipped with atmosphere control in EQUIPE Cerámicas. EQUIPE Cerámicas continues to rely on our OPTIMA® analyzers and from OXYCOMB Sistemas we thank them for the trusting us once again.

Design, Engineering and Supply of a "turnkey contract” for continuous monitoring of emissions   

2018/04/16

ALUMASA, a Spanish family company dedicated to the continuous coil coating of aluminum, reaches an agreement with OXYCOMB Sistemas for the installation of a continuous monitoring system for emissions at its Villafranca de los Barros plant. Its policy of constant expansion, the effort of its team, its commitment to the environment and the continuous improvement of its processes to offer the best quality and service, have led ALUMASA to launch a hot rolling line. If your integrated ...

New OPTIMA® system installed in a ceramic kiln of special pieces and small format.   

2018/04/13

OXYCOMB Sistemas continues to export and enters fully into the Maghreb   

2018/04/12

OXYCOMB Sistemas continues its expansion through the Maghreb with the installation of new OPTIMA® equipment in kilns of various ceramic plants. The important energy savings achieved have been fundamental to expand in this great market. Merci per voutre confiance!

MARAZZI relies on OXYCOMB Sistemas again.   

2018/04/11

GRUPO MARAZZI, belonging to the multinational Mohawk Industries, a multinational present in more than 100 countries with production centers in the USA, France, Italy, Russia, China and Spain, has just assembled a new OPTIMA® System in another ceramic kiln in one of its plants of Spain. After the good results harvested in the first kiln installed with a control system of %O2 and pressure, MARAZZI relies on our equipment again. OXYCOMB Sistemas is expecting this to be ...

OXYCOMB Sistemas will visit the International Fair CERAMITEC   

2018/04/10

OXYCOMB Sistemas will be present in the international fair CERAMITEC which takes place between the 10th and the 13th of April in the city of Munich, Germany. CERAMITEC, exposes triennially the latest developments in machinery, equipment, systems, processes and raw materials for ceramics and powder metallurgy. It shows the latest trends and innovations in the market and, of course, OXYCOMB Sistemas will attend that appointment.

100% success in granting the assistance presented in the field of energy savings and energy efficiency of IVACE 2017   

2018/02/14

All projects submitted by our Clients during the year 2017, for which IVACE assistance was requested for the installation of our OPTIMA ® continuous control and analysis systems, have received confirmation of their concession. This has been a 100% success regarding the requests presented at the beginning of the year and an important incentive for our Clients. OXYCOMB Sistemas collaborates with all its Clients to present such assistance. Call us!

OXYCOMB Sistemas on the verge of winning the “Alfa de Oro” again - CEVISAMA 2018   

2018/02/12

OXYCOMB Sistemas became finalist twice in a row at the “Alfa de Oro” awards recently granted in its 42ª edition during the last international ceramic tile fair “Cevisama 2018”. Despite not being finally awarded, just the fact OPTIMA ® project has been again nominated among an innumerable amount of proposals, it makes us very proud and motivates us to keep working, innovating and improving the quality of our products and services to optimize the combustion ...

Oxygen and pressure control in a porcelain stoneware ceramic kiln   

2018/02/12

TODAGRES, a pioneer and specialized company in the manufacturing, distribution and sale of technical stoneware pavements bets for the OXYCOMB Sistemas technological solutions to carry out the continuous oxygen control in its productive process. With the oxygen monitoring it is expected to improve the quality standards while lowering the production energy-costs simultaneously. This allows TODAGRES to enhance their product as well as reinforce its environmental policy. Therefore, OXYCOMB Sistemas thanks TODAGRES the trust placed in us.

OXYCOMB Sistemas also measures, analyzes and controls double-firing ceramic kilns   

2018/02/12

APAVISA, a leading marketing and producer of high quality technical tiles, bets for the OXYCOMB Sistemas technological solutions for the continuous oxygen control in its productive process. With these enhancements, it is expected to improve the quality and lower the production costs simultaneously. This will allow APAVISA to reach new quality levels at the same time that reinforces its strong environmental policy. Therefore, OXYCOMB Sistemas thanks APAVISA the confidence placed.

OXYCOMB Sistemas will be present in CEVISAMA 2018   

2018/01/24

OXYCOMB Sistemas will be attending one more year to CEVISAMA 2018, the International reference trade fair for Ceramic Tile, Brick, Glazes, Frits and Machinery that will be held in Valencia from 5 to 9 February.

We will be delighted to meet you in our stand with all our team at (N2 – P6 – F174) and introduce all our novelties among which is the new monitoring and measurement retransmission unit, the DATATRACKER ® .

We ...

Itaca - Esmalglass Grupo repeats and opts for control oxygen in more calcination furnaces   

2017/12/28

ITACA – ESMALGLASS Grupo, the ceramic frits, glazes and stains world leading company, puts its trust again on the OXYCOMB Sistemas equipment technology for the combustion atmosphere continuous monitoring on one of their new kilns.

OXYCOMB Sistemas thanks ITACA – ESMALGLASS the confidence placed in us.

TUBOS REUNIDOS optimishes their kilns's combustion with OXYCOMB Sistemas   

2017/11/22

Last April, TUBOS REUNIDOS and OXYCOMB Sistemas reached an agreement for the installation of oxygen probes on another of their heat treatment kilns.

Doubtlessly, the proper results obtained till now have convinced TUBOS REUNIDOS about the suitability of doing new installations.

OXYCOMB Sistemas loves taking part in our customer’s process improvements.

New OPTIMA oxygen control equipment for Barbieri & Tarozzi’s Titanium kilns   

2017/11/13

OXYCOMB Sistemas delivers a new order of %O2 and pressure continuous monitoring equipment to Barbieri & Tarozzi to install on their new Titanium series kilns.

Barbieri & Tarozzi illustrates with the installation of the OPTIMA ® continuous monitoring equipment on their newer kilns the importance of optimizing and adjusting the ceramic cooking process thoroughly.

CODICER95 repeats by installing a brand new Sistema OPTIMA in another kiln   

2017/10/26

Again, after relying in 2015 on the OXYCOMB Sistemas technical solutions for continuous oxygen monitoring in one of their kilns, CODICER95 bets once more for the Sistema OPTIMA ® on another kiln.

OXYCOMB Sistemas feels happy and proud to see how its customers, satisfied with the obtained results and relying in our technical department during all this time, repeat with us through a new installation on another kiln.

OXYCOMB continues its expansion in the Italian market   

2017/10/09

OXYCOMB Sistemas, following its export and international expansion, mightily lands in Italy through the installation of a new Sistema OPTIMA ® at Antica Ceramica Rubiera, a large porcelain stoneware producer.

OXYCOMB Sistemas, as technology export company and energy advisor-consultant, proceeds with its strong commitment on giving service wherever it‘s required. No matter where it has to be controlled, what matters is how!

OXYCOMB Sistemas continues to open new markets   

2017/09/18

A Portuguese company, metal heat treatment leading producer, signs a major deal with OXYCOMB Sistemas for oxygen probes provisioning. With the continuous oxygen monitoring in controlled environment furnaces for heat treatment, our Client expects to improve their products quality for strengthening its lead position.

In OXYCOMB Sistemas we continue to grow and betting for export. We thank them the trust placed in our technological solutions.

OXYCOMB Sistemas signs an important deal with UBE   

2017/08/21

OXYCOMB Sistemas signs an important deal with UBE a reference corporate group in the production of value added chemical products and sustainable technological solutions creation sectors for the oxygen control in two emitting sources.

With this agreement OXYCOMB Sistemas reinforces its wager for diversification, proving their products and services versatility.

OXYCOMB Sistemas – North of Africa   

2017/07/19

OXYCOMB Sistemas, following its export and international expansion, begins its activity in North Africa with the installation of new OPTIMA® equipments in multiple ceramic kilns along our neighbor Morocco.

The goal of these new installations is to stabilize the product quality and to achieve remarkable productive saves in energy terms as well.

Thank you for your confidence!

COVERINGS International Fair   

2017/04/11

The COVERINGS International Fair annually awards the "Installation and Design Awards for Coverings" that reward the design and use of ceramic pieces. For the fourth consecutive year, projects with the label of Tile of Spain are the protagonists of these COVERINGS awards.

Thanks to our OPTIMA System the companies in the ceramic sector can improve their combustion process and the quality of their final product.

A second Sistema OPTIMA for oxygen control is installed at OSET   

2017/02/24

By the last year’s end OXYCOMB Sistemas closed the deal for the installation of a combustion atmosphere control system on one of the SITI ceramic furnaces at José Oset & Cia. With this second Sistema OPTIMA ® implementation the customer expects to reach further results in regarding to the first kiln.

Oxygen, pressure and continuous temperature control have become indispensable for our customers when tuning up kilns.

GRUPO HALCÓN puts their trust in the OXYCOMB Sistemas equipment once again   

2017/02/10

This time our Sistema OPTIMA ® will be installed on two of the kilns located in the ONICE factory.

GRUPO HALCÓN trusts in our systems since 2014 due to the great results obtained by our equipment in the multiple ceramic kilns located along their several production plants.

From OXYCOMB Sistemas we want to thank GRUPO HALCÓN by the confidence placed in our equipment and energetic advisory service.

TEMPRA, an Italian company belonging to Gambini group has chosen our Sistema OPTIMA for energy efficiency and saving in one of their ceramic kilns   

2017/02/02

TEMPRA, an Italian company belonging to Gambini group bets for saving and energy efficiency by installing our Sistema OPTIMA ® in one of their SACMI ceramic kilns.

OXYCOMB Sistemas is deeply proud of the trust that a renowned company like TEMPRA has put on us for their great energy saving project. With the gas burners replacement and the oxygen and pressure measurement system they expect to reach energy savings beyond 12%.

With this installation OXYCOMB ...

OXYCOMB Sistemas signs the installation of OPTIMA® Systems in 6 new cremation kilns   

2017/01/09

With the beginning of 2017, OXYCOMB Sistemas has managed the agreement for the installation of atmosphere control systems in another 6 new cremation kilns.

With these 6 OPTIMA ® Systems, OXYCOMB Sistemas strengthen in the incineration / cremation sector.

MARAZZI is committed to the oxygen control in one of its roller kilns   

2016/12/28

MARAZZI, an international leader in the ceramic flooring and pavement sector, installed last December an OPTIMA ® System in one of its kilns at Castellón (Spain).

With this installation, MARAZZI intends to carry out an exhaustive control of the firing process in order to achieve with quality standards and to improve energy efficiency.

OXYCOMB Sistemas hopes this is the beginning of a close collaboration with MARAZZI GROUP.

OXYCOMB Sistemas begins its journey in extrusion ceramic kilns   

2016/12/20

After becoming a national reference in the control of combustion atmospheres in ceramic kilns for pressed product (tilling), OXYCOMB Sistemas begins to work in the control of atmospheres in kilns for extruded product.

Last December, an OPTIMA ® System was installed for the %O2, pressure and temperature control at one kiln of EXAGRES, VERSATILE group.

The dimensions, thicknesses and characteristics of extruded products make necessary to continuously control the combustion atmosphere for both quality and ...

OXYCOMB Sistemas has sealed an agreement to install a new OPTIMA® System in an incineration furnace in Panama   

2016/11/30

OXYCOMB Sistemas has recently reached an agreement to supply and install an atmosphere control system in an incineration furnace for solid urban waste in Panama.

With this installation, OXYCOMB Sistemas continues its expansion throughout the Americas.

New OPTIMA® Systems are installed in two SACMI kilns in EQUIPE Cerámicas   

2016/09/28

OXYCOMB Sistemas has recently installed two new OPTIMA ® Systems to control %O2 and pressure in both Sacmi kilns. With this installation, there are already 3 kilns equipped with atmosphere control in EQUIPE Cerámicas.

Great results obtained in the kiln No.4 both qualitatively and energetically have made the company has decided to install the OPTIMA® System in these two additional kilns.

EQUIPE Cerámicas continues trusting our OPTIMA ® analyzers and this encourages us to go ...

OXYCOMB SISTEMAS S. L. is pleased to invite you to visit its stand D1 - 188 at TECNARGILLA 2016   

2016/09/19

Tecnargilla is the world's most important international showcase of technological innovation and aesthetics for the ceramic and brick industries.

We are happy to welcome you to our stand and present our collection and novelties in Rimini from 26th-30th September 2016.

OXYCOMB Sistemas Levante moves to another office   

2016/07/05

The Levante delegation of OXYCOMB Sistemas moved last June to a new office. We hope these larger facilities allow us to offer, if possible, better service and a closer attention to our Customers.

The new office is located in the same building as the previous one. The address is:

C/ María Rosa Molas, 40 – B5

12004 Castellón

We are glad to grow with you!

Victory in the IV Paddle Tennis Tournament of the Ceramic Sector   

2016/06/30

The brave team made up of employees of the Levant local office of OXYCOMB Sistemas took part recently in the IV Paddle Tennis Tournament of the Ceramic Sector organised by ATC and GRUPO TORRECID.

After a tough battle with the other teams, OXYCOMB finally won the championship trophy in the Bronze Category.

We feel proud of our team and encourage them to keep participating in further editions. OXYCOMB is on fire!

New OPTIMA System in a SACMI EKO kiln   

2016/06/21

OXYCOMB Sistemas has recently installed the OPTIMA® System to control %O2 and pressure in the brand new EKO kiln that was installed in the plant of COLORKER. Including this system, there are already three kilns equipped with atmosphere control in COLORKER.

The results obtained in the two previous kilns regarding quality improvement and energy savings have made essential the installation of the OPTIMA® System in the latest EKO kiln.

From OXYCOMB Sistemas we want to ...

CICOGRES installs a new OPTIMA System in another of its kilns   

2016/05/19

Only 9 months after the installation of the first OPTIMA System, CICOGRES puts its trust again in OXYCOMB Sistemas equipment.

Doubtlessly, the excellent results obtained during the last months in quality improving and consumption reduction have convinced CICOGRES to invest one more time in combustion atmosphere control.

OXYCOMB Sistemas would like to thank CICOGRES for trusting in our work and in our energy consultancy tasks.

HERMANOS LLANSOLA opts for oxygen control in a ceramic bisque kiln   

2016/04/27

HERMANOS LLANSOLA, S.L., a company specialized in manufacturing of ceramic bisque and special parts, has just set up the oxygen and pressure control in one of its kilns.

With a long tradition in ceramic industry since 1912, HERMANOS LLANSOLA chooses the atmosphere control so as to improve in product quality and energy saving. This demonstrates that tradition and technology must walk hand in hand.

Grupo HALCÓN confirms the installation of OPTIMA System in two new kilns   

2016/03/28

Having met expectations in the previous furnaces and having far exceeded the savings guaranteed by OXYCOMB Sistemas, GRUPO HALCÓN recently closed the installation of two additional OPTIMA ® XA Systems for control of %O2, pressure and temperature in two kilns.

With these two pieces of equipment, there are 5 kilns already equipped with our control systems. In addition, an agreement for installing the system in a sixth kiln has been already signed. GRUPO HALCÓN knows ...

OXYCOMB Sistemas appears in Técnica Cerámica magazine   

2016/03/28

No. 429 of Técnica Cerámica magazine collected the participation of OXYCOMB Sistemas as an exhibitor at CEVISAMA 2016 in the special report devoted to this fair.

OXYCOMB Sistemas showed its latest developments regarding the control of combustion processes, especially the OPTIMA ® System, and looked after all visitors interested in this innovative technology.

OXYCOMB Sistemas was a finalist in recent Alfa de Oro Awards   

2016/02/11

OXYCOMB Sistemas was recently a finalist in the Alfa de Oro Awards presented in CEVISAMA 2016. Despite not being awarded, the election of our project among a countless number of outstanding proposals makes us feel proud and encourages us to keep on working and innovating to improve your combustion process. Thank you so much, especially to all our customers.

Cevisama 2016   

2016/02/11

OXYCOMB Sistemas appreciates the interest shown to all visitors who came to the stand to find out the innovations presented during the last edition of CEVISAMA 2016. We are very pleased to see the great reception that took our new proposals and and we promise to do our best for the next edition in two years, in which we will surely expose new projects.

EQUIPE CERÁMICAS decides to install the OPTIMA® system   

2016/01/15

EQUIPE CERÁMICAS, leading company in the small format sector, is adapting to changing times by installing the OPTIMA ® system for continuous control of oxygen, pressure and temperature in one of its furnaces. EQUIPE CERÁMICAS expects to have excellent energy savings in the kiln thanks to OXYCOMB Sistemas service and the new system introduced.

New orders for oxygen measurement equipment for crematories   

2015/11/10

OXYCOMB Sistemas has just received several orders to install four %O2 and pressure control systems for incinerators. OXYCOMB Sistemas has established itself as the nationwide leading manufacturer of equipment for continuous monitoring of %O2, temperature and static pressure of combustion gases in furnaces and boilers belonging to industrial cremation and incineration sector

COMPACGLASS bets again on oxygen and pressure control in its new double-channel Barbieri & Tarozzi kiln   

2015/10/06

October 2015 After getting good results in the single-channel kiln, COMPACGLASS has decided to install another OPTIMA ® system for controlling the combustion in the new double-channel B&T kiln. With this installation, COMPACGLASS – GRUPO PAMESA shows once again its true and determined commitment to energy saving and efficiency in its kilns

GRESITEC optimizes the firing process in one of its kilns   

2015/09/26

Excellent references received from neighbouring companies on the use and results obtained with OPTIMA ® XA system, have enabled GRESITEC has made the decision to control the combustion atmosphere in one of its kilns. With the installed equipment and technical advice from OXYCOMB Sistemas, we expect GRESITEC to improve the energy efficiency of its furnace.

New equipment installed in CICOGRES plant   

2015/08/17

August 2015 True to its principles of continuous development, CICOGRES will use from now on the OPTIMA ® XA technology in one of its furnaces to improve energy efficiency and product quality. We expect that CICOGRES gets excellent results in a short period of time

HALCÓN Cerámicas opts again for OXYCOMB Sistemas   

2015/07/22

July 2015 After 9 months from the installation of the OPTIMA ® XA system in one of its kilns, and having obtained excellent results in reducing consumption and improving quality, HALCÓN Cerámicas has ordered new equipment to OXYCOMB. In OXYCOMB Sistemas we are convinced that the customer will get back to optimize the firing process with the new system installed. There are many expectations and OXYCOMB Sistemas hopes to meet them in the same way as the ...

New order for cremation sector   

2015/07/01

July 2015 OXYCOMB Sistemas has just received a major order for the installation of three systems for controlling continuously %O2 and pressure in two crematory ovens. With this order OXYCOMB Sistemas is positioned as the nationwide leading manufacturer of equipment for continuous monitoring of %O2, temperature and static pressure of combustion gases in furnaces and boilers belonging to industrial cremation and incineration sector

AZTECA focuses on increasing energy efficiency in furnaces   

2015/06/18

May 2015 AZTECA Cerámica, true to its principles, continues with the modernization of their production process. Under the premise of continuous energy and quality improvement, AZTECA has decided to innovate and continuously measure the combustion atmosphere in one of their furnaces for floor and wall tiles. Because of this, the goal is clear: saving + quality”.

AZULEJOS ALCOR bets on energy saving walking hand in hand with OXICOMB Sistemas   

2015/04/29

April 2015 OXYCOMB Sistemas installed a new OPTIMA ® XA system for continuous monitoring of %O2, temperature and pressure in one kiln in AZULEJOS ALCOR. ALCOR, which has based its business development on the use of the highest industrial technology, takes a step forward. The goals are quality improvement and increasing energy savings through measurement, analysis and control of the process

CEVICA joins the bandwagon of savings installing the OPTIMA® XA system   

2015/03/30

March 2015 CEVICA, specialized in the manufacture of small-format ceramics, edgings and special pieces has decided to bet on continuous monitoring of the combustion atmosphere in their furnaces with the clear objective to reduce specific fuel consumption and improve the quality of the final product

New OPTIMA® system installed in HALCÓN Cerámicas   

2014/11/28

November 2014 OXYCOMB Sistemas continues its expansion as energy consultant and equipment supplier for analysis and control of combustion atmospheres within the ceramic tile manufacturers sector. HALCÓN Cerámicas acquired a piece of equipment by the end of the year for one of its furnaces. The goal is to optimize the firing process a bit more. There are many expectations and from OXYCOMB Sistemas we hope to more than fulfill the trust placed in our equipment and technicians

New OPTIMA® XA-P system installed in LA PLATERA   

2014/10/24

October 2014 OXCOMB continues its expansion in the ceramic tiles sector by installing an OPTIMA ® system for atmosphere control last October in one kiln of LA PLATERA. The savings target set by OXYCOMB Sistemas in this facility is ambitious and has become an exciting technical challenge. Although the kiln already had an optimum control and extremely low specific consumptions, OXYCOMB Sistemas expects to adjust and improve that regulation in order to reach the minimum savings goal ...

EL BARCO Azulejos Cerámicos invests in a system for continuous monitoring of oxygen and pressure for one of its kilns   

2014/10/17

October 2014 After long negotiations with EL BARCO Azulejos Cerámicos, OXYCOMB Sistems gets involved in a new project of energy saving and efficiency with the installation of the first OPTIMA ® XA system in this Client. OXYCOMB Sistemas appreciates the trust placed by EL BARCO in our equipment and technicians

TORRECID bets on further control in its frit furnaces   

2014/10/10

Last October, OXYCOMB Sistemas served a new OPTIMA ® XFR system to TORRECID for one of its plants. This new installation will allow TORRECID to control pressure and oxidation levels of the combustion atmosphere within its frit furnaces. The fact is that atmosphere control is synonymous with quality + savings

OXYCOMB Sistemas equipment for continuous monitoring of %O2, temperature and pressure are compatible with the requirements imposed on the IPPC for self-monitoring measures in chimney   

2014/09/03

Environmental legislation promoted by central, regional and municipal governments to protect the environment from polluting air emissions, have made possible OXYCOMB Systems stands as a leader in the manufacture and installation of control and continuous analysis of combustion gases equipment OPTIMA ® and BLUESKY ® analyzers for oxygen, temperature and pressure are the most appropriate technology to meet the requirements of the Integrated Pollution Prevention and Control (IPPC). With this equipment, internal self-control measures on emission ...

The big savings obtained with the OPTIMA® XA system previously installed have driven COLORKER PORCELANICO to install new equipment in another kiln   

2014/08/28

Just three months after the first installation, COLORKER has decided to install a second OPTIMA® system in another of its kilns. The decision has come about because of the important energy savings almost immediately obtained in the first kiln. In addition, with the continuous control of %O2 and pressure, Client can do a tighter quality control

CODICER95 installs the OPTIMA® XA-P system in one of its kilns   

2014/06/27

The great efforts being made by CODICER95 in reducing specific fuel consumption have led them to bet firmly on the installation of OPTIMA ® system in one of its kilns. The high competitiveness of the current ceramic market demands any tile company to improve product quality and energy efficiency performing control measures such as the analysis of the combustion atmosphere in furnaces. With such measures, firing process can be optimized and it is possible to regulate ...

COLORKER opts for the continuous monitoring of oxygen and pressure in one of its ceramic furnaces   

2014/04/15

OXYCOMB Sistemas finally closed a deal with COLORKER for OPTIMA ® XA installation in one of its ceramic furnaces. COLORKER expects such control allows them to achieve significant energy savings in a short space of time as well as high product quality with different production conditions

COMPACGLASS joins the energy savings with the installation of the OPTIMA® XA system in one of its furnaces   

2014/04/02

With the installation of the OPTIMA ® XA system for continuous monitoring of %O2 and pressure in one of its furnaces, COMPACGLASS firmly commits to energy efficiency and cost control. COMPACGLASS hopes to repeat the excellent saving data achieved in PAMESA

OXYCOMB Sistemas surpasses the figure of 50 ceramic furnaces equipped with the OPTIMA® XA system   

2014/03/26

Last February, with the last two installations in the ceramics sector, OXYCOMB Sistemas reached 50 furnaces equipped with control systems and continuous monitoring of combustion atmospheres. OXYCOMB Sistemas greatly thanks all its customers to have reached this figure and promises to keep on working hard so that together we continue optimizing ceramic firing processes, reducing production costs and improving energy efficiency. All this with a fundamental premise, maintain and improve the quality of the final ...

PAMESA Cerámica installs a new OPTIMA® system to control oxygen, temperature and pressure   

2014/01/16

PAMESA Cerámica continues to bet on energy saving and efficiency in its kilns. Excellent results obtained in the 3 adjacent furnaces have confirmed the need to continue pushing for control of the combustion atmosphere in order to optimize the process, lowering gas consumption and improving product quality. With the implementation of the fourth OPTIMA ® system and the technical advice from OXYCOMB Sistemas, PAMESA Cerámicas expects to achieve similar or even better results to those already obtained ...

OXYCOMB Sistemas launches new BLUESKY® analyzers for continuous measurement of %O2 and temperature in channeled emission sources   

2013/12/27

OXYCOMB Sistemas launches the first analyzer entirely developed and manufactured nationwide to be able to measure continuously and in situ %O2, temperature and CO2 in channeled emission sources at temperatures below 450oC. The growing concern of society to protect the environment of polluting air emissions, and the increasingly demanding environmental legislation enabled OXYCOMB to start a new innovative project for developing a new type of analyzer that had to give solution to the lack of alternatives ...

OXYCOMB Systems has established itself as a supplier of equipment for the control of oxygen in grain drying   

2013/11/27

Last November, OXYCOMB Sistemas installed a new OPTIMA ® System in a grain dryer located in the south of France. With the continuous measurement of %O2, static pressure and temperature, our Client can optimize the combustion inside the boiler by regulating the fuel/oxidizer ratio. In addition, the system allows you to adjust the oxidation levels of the combustion atmosphere to the limits set by law

Cerámica RIBESALBES reaches an agreement with OXYCOMB Sistemas for controlling the combustión atmosphere in its double-channel kiln   

2013/10/31

The firm commitment to continuous improvement within the ceramic firing process has made Cerámicas RIBESALBES choose OXYCOMB Sistemas as a technological partner for the optimization of combustion in its double-channel kiln. The previous detailed study of the levels of oxygen, pressure and temperature in the firing-cooling zone carried out by OXYCOMB Sistemas definitely convinced Cerámica RIBESALBES to install the OPTIMA® system. With OPTIMA ® XA analyzers for oxygen and pressure now installed, our Client seeks to ...

OXYCOMB Sistemas obteins a new order from TUBOS REUNIDOS S.A.   

2012/07/05

Our forecasts of important entry in the metallurgical sector are confirmed by the obtaining of a new order for our client TUBOS REUNIDOS S.A. for the control of the atmosphere in his reduction furnace.

OXYCOMB Sistemas Launches New Webpage   

2012/03/05

OXYCOMB Sistemas has launched its new webpage. The new site is quicker, more dynamic and more user friendly. Its goal is to optimise information searches on our wide range of products and the huge diversity of their applications.

A more functional and up-to-date design has been devised to make it easier to access the content of most interest. Its main advantages include the possibility of professionals being able to quickly access products classified according to ...

Energy Efficiency and Savings in Cerámicas FANAL: Installation of the OPTIMA XA System   

2012/03/05

Journal: Técnica Cerámica Nº 391 (June 2011)

Cerámicas FANAL, a nationally and internationally renowned company in the ceramic floor tile manufacturing sector, has chosen the OPTIMA System of OXYCOMB Sistemas.

The current environment of constant increases in the price of fuels, the application of measures aimed at reducing emissions of CO2 and NOx, and greater demands in regard to production qualities, led Cerámicas FANAL to install an OPTIMA System in one of its ovens halfway ...

Arriba